Wood boiler sales & installation · Renfrew, Ontario

Wood heat, done right.

Outdoor and gasification wood boilers from Portage & Main and Polar Furnace, plus the pipe, pumps and parts that tie them into your home, shop or farm. Serving Renfrew County, Ottawa and surrounding areas.

  • 2 boiler brands
  • Sales + installation
  • Parts & supplies
A Portage & Main outdoor wood boiler on a concrete pad under a timber-frame shelter, doors open, with buckets of boiler supplies beside it
Portage & Main Outdoor boiler, set on its pad

The boilers

Two proven brands. One right fit for your place.

Both burn wood and heat water that's piped to your buildings. They differ in how they burn. We'll help you pick the brand and size for what you need to heat.

Portage & Main Ultimizer Wood Series outdoor boiler

Portage & Main

Ultimizer Wood Series

A refractory-lined, dry-base outdoor boiler with a full-length quad-pass heat exchanger surrounded by water. Its sectional build means the water jacket unbolts from the brick-lined base and can be replaced with no welding, so it can be rebuilt rather than thrown away.

Type
Outdoor wood boiler (updraft gasifier)
Models
BL 25×34 · 28×40 · 34×44 · 40×44
Rated output
Up to 500,000 BTU across four sizes; heats from under 2,000 to 12,000 sq ft
Installs
Outdoors
Ties into
Existing forced-air or hydronic heating, hot water, other buildings, pools and hot tubs
Polar Furnace G-Class wood gasification boiler

Polar Furnace

G-Class Gasification

A downdraft wood gasification boiler, EPA certified. It supplies heat and domestic hot water for homes, cottages, businesses and farms, and can also heat pools, spas and hot tubs.

Type
Downdraft gasification boiler
Models
G2 · G2 Plus · G3
Rated output
60,000 – 140,000 BTU (8-hour rating); 160,000 – 200,000 BTU max
Installs
Outdoors or indoors
Ties into
Hydronic heating, hot water, pools, spas and hot tubs

Specs are from Portage & Main and Polar Furnace, checked September 2026. Call or email for current pricing and availability. Product images courtesy of Portage & Main and Polar Furnace.

Parts & supplies

What connects the boiler to your house.

A wood boiler is only part of the system. We also sell the parts that carry its heat indoors. Tap a part to see where it goes. We tie in radiant floors, radiators, furnaces and hot water. Hover over the boiler, underground pipe, manifold, radiant floor, radiator or hot water tank to see the real thing.

How an outdoor wood boiler heats a house Hot water leaves the outdoor wood boiler and is pushed by a pump through insulated underground pipe into the basement, where it enters the manifold. The manifold feeds four separate branches side by side: a plate heat exchanger for the hot water tank, a coil in the furnace, the radiant floor, and radiators. Each branch returns on its own line straight back to the manifold, and one return line carries the water back to the boiler. Manifold Outdoor wood boiler Insulated underground pipe Your home Radiant floor Radiators Hot water tank Furnace coil Hot supply Cooler return
Circulator pump on white background
Circulator pumps
Replacement pump cartridge showing the impeller
Pump cartridges (replacement motors)
Zone manifold with blue ball valves on each branch
Manifolds
Coils of insulated underground pipe on pallets
Insulated underground pipe
Drum of Cryo-Tek 100 antifreeze
Glycol
Four-litre jug of outdoor boiler treatment
Boiler treatment, 4 L
Plate heat exchanger with brass pipe fittings
Plate heat exchanger

Need a part?

Tell us your boiler make and model, the part you're after, and send a photo if you can. We'll confirm options, pricing and availability.

Email a parts request

or call 613-433-1063

From first call to first fire

We sell it, and we install it.

Buying a boiler starts with what you need to heat. We'll size the boiler and plan the pipe run and connections with you, then handle the installation.

Heating pipework on a basement wall: a black iron manifold with blue and yellow shutoff valves, PEX lines and an orange water filter
Manifold, shutoffs and filter on a mechanical-room wall
  1. Tell us about your property

    Where you are, which buildings you want to heat, and what heats them now: an oil or propane furnace, baseboard, in-floor or a wood stove.

  2. Choose the boiler and size

    We'll compare the Portage & Main and Polar Furnace options for your heat load and the way you like to burn wood, with current pricing.

  3. Plan the connection

    Where the boiler sits, how far the underground pipe runs, and how it ties into your system: furnace coil, heat exchanger, manifold or hot water.

  4. Installation

    We install the boiler and its connections, and can supply the pumps, pipe, glycol and treatment the job needs.

Our work

From the truck to the woodshed.

Real boilers we've delivered, set and put to work: unloading, hauling, setting the pad and running through winter. Swipe or use the arrows.

Quote planner

Tell us what you're heating.

Fill in what you know and skip the rest. This builds an email you can review and send from your own inbox. Nothing is sent until you press Send.

What do you want to heat?
Do you need installation?

Common questions

Before you buy a wood boiler.

Don't see your question? Call 613-433-1063.

What's the difference between the two boiler types?

The Portage & Main Ultimizer is an updraft gasifier: it burns wood in a refractory-lined firebox with air fed above and below the fire, then pulls heat from the exhaust through a four-pass heat exchanger surrounded by water. The Polar G-Class is a downdraft gasifier: it burns the wood gases in a second high-temperature stage. Gasification boilers generally do best on dry, seasoned wood. We'll talk through which suits your wood supply and how you like to load.

Will it work with my existing furnace or boiler?

In most homes, yes. With forced air, a water-to-air coil goes in the furnace plenum and the existing blower moves the heat. With in-floor or hot-water baseboard, the boiler usually connects through a plate heat exchanger or manifold. Your current system can often stay in place as backup.

How far from the house can the boiler go?

It depends on your property and heat load. A longer run needs the right insulated pipe and pump sizing. Give us a rough distance and we'll plan around it.

Can one boiler heat more than one building?

Often, yes. A single boiler can serve a house plus a shop or barn, and domestic hot water, with separate underground lines and zones. The total load decides the boiler size.

Why do I need glycol or boiler treatment?

Treatment helps protect the boiler's water jacket against corrosion and scale. Glycol adds freeze protection in systems or buildings that need it. We carry both and can tell you what your system calls for.

What does it cost?

That depends on the model, the pipe run and how the boiler ties into your system. Use the quote planner above or call us for current pricing and availability.

Call Plan your quote